Murals are one of the important cultural heritages of mankind. The microbial control of murals is an important subject in mural painting conservation. In recent years, electron beam radiation sterilization has attracted more and more attention in the field of cultural relic protection. Murals are immovable cultural relics, so conventional electron beam irradiation equipment can not be used. However, the development of small mobile electron beam irradiation equipment shows the potential of radiation’s application in the sterilization protection of immovable cultural relics such as murals. A feasibility study of radiation sterilization in mural paintings is needed to investigate the effect of sterilization and the influence of sterilization dose on the stability of mural painting pigments and bonding materials. In this paper, the radiation effects of typical bacteria in tomb murals and mineral pigment powder in ancient Chinese paintings were studied in a laboratory. Firstly, aeromonas hy... [more]

It is quite essential to obtain an excellent CO2 adsorption capacity, CO2 adsorption selectivity and water vapor stability at the same time for practical CO2 capture after combustion. Through the combination of ultramicropore and the high density of CO2-philic sites without OMSs, an ultra-microporous Cu-based metal−organic framework has been designed and synthesized, featuring a high CO2 capacity (99 cm3 g−1 and 56.6 cm3 g−1 at 273 K and 298 K, respectively), high selectivity over N2 (118 at a scale of CO2/N2 15/85, 298 K) and excellent water vapor stability, simultaneously. Theoretical calculations indicate that neighboring ketonic O atoms with suitable distance play vital roles in boosting CO2 selective capture.

Micro-structured surfaces possess excellent properties of friction, lubrication, drag reduction, antibacterial, and self-cleaning, which have been widely applied in optical, medical, national defense, aerospace fields, etc. Therefore, it is requisite to study the fabrication methods of micro-structures to improve the accuracy and enhance the performance of micro-structures. At present, there are plenty of studies focusing on the preparation of micro-structures; therefore, systematic review of the technologies and developing trend on the fabrication of micro-structures are needed. In present review, the fabrication methods of various micro-structures are compared and summarized. Specially, the characteristics and applications of ultra-precision machining (UPM) technology in the fabrication of micro-structures are mainly discussed. Additionally, the assistive technologies applied into UPM, such as fast tool servo (FTS) technology and slow tool servo (STS) technology to fabricate micro-st... [more]

This research aimed to study the effects of individual components on the physicochemical properties of systems composed of surfactants, polymers, oils, and electrolytes in order to maximize the recovery efficiency of kerosene while minimizing the impact on the environment and human health. Four independent factors, namely anionic surfactant sodium dodecylbenzene sulfonate (X1) (SDBS), oil (X2) (kerosene), water-soluble polymer poly(ethylene glycol) (X3) (PEG), and sodium chloride (X4) (NaCl), were studied using the full factorial design (FFD) model. Four output variables, namely conductivity (Y1), turbidity (Y2), viscosity (Y3), and interfacial tension (IFT) (Y4), were taken as the response variables. All four FFD models have high coefficients of determination and low errors. The developed models were used in a multi-objective optimization (MOO) framework to determine the optimal conditions. The obtained optimal conditions are X1 = 0.01, X2 = 50, X3 = 5, and X4 = 0.1, with an error of... [more]

In the proposed study, agro-waste biomass oat straw (OS) was considered a potential adsorbent for Cu(II), Zn(II), and Se(IV) removal from aqueous solutions. In order to obtain material with better adsorption abilities, the OS was modified by a deep eutectic solvent (DES). Structural changes caused by the applied modification route were considered by pHpzc, SEM, FTIR, and DSC/TG analysis. These methods discovered that lignocellulosic biomass degradation and material functionalization were achieved by DES treatment. Preliminary adsorption tests showed an over fourfold increase in capacity upon modification. The kinetic parameters implied that adsorption on modified material followed the pseudo-second-order kinetic model. Different isotherm models were applied to experimental data, while the Sips isotherm model best describes the equilibrium of the adsorption process on the tested modified material. According to this isotherm model, the maximum achieved adsorption capacities of Cu(II), Zn... [more]

In this work, a soft-elastic pulsation pump (SEPP) has been made and investigated. Here, 3D printing was used to make casting molds and a melt-removal method using wax was employed. The SEPP was made of silicone rubber and driven by an external squeezing mechanism. A silicone one-way valve was also made which prevented backflow after the fluid was squeezed out of the pump chamber. The material characteristics of the SEPP including durability were examined. The pump operating parameters were confirmed to differential pressure of 100 mm Hg in a close flow loop. The average flow rate was 2 L/min, while yielding a peak flow of 8 L/min, and a stroke volume of 70 mL. A preliminary trial using fresh animal blood had shown that the SEPP has good protection on the blood. Therefore, within the resources available, an interesting idea for an effective SEPP has been proposed and realized in the laboratory. The technical details of the SEPP described, and the experimental results reported here form... [more]

Diethyldithiocarbamate (DDTC) is employed in the sulfide ore flotation process due to its excellent collection performance. Herein, we investigated the interfacial adsorption behavior of DDTC on the four main mineral phases of high-sulfur residue: sulfur, pyrite, sphalerite, and lead sulfate. The adsorption behavior of DDTC and H2O, namely, the adsorption structure and the energy and electron localization function cross section, were explored using density function theory calculation. The results were helpful in constructing a coadsorption model of DDTC and H2O, which was validated by pure mineral flotation and characterization of Fourier transform infrared spectra. The coadsorption model indicated that the adsorption of DDTC on sulfur, sphalerite, and lead sulfate was weak with physical bonding, while its adsorption on pyrite was strong with chemical bonding. Practical bench-scale high-sulfur residue flotation was performed, and the result was different from that obtained from pure mi... [more]

The problem of CO2 waste in the atmosphere is a major concern, and methods of CO2 utilization are being currently developed. In the present work, a plasma-catalytic process is applied for CO2 dissociation. A series of MgO and CeO2-containing catalysts were synthesized, and the samples were characterized by: a low-temperature N2 adsorption-desorption analysis, X-ray diffraction, X-ray photoelectron spectroscopy, temperature-programmed desorption of CO2, and X-ray fluorescence spectroscopy. It was stated that under dielectric barrier discharge conditions, the catalyst surface, composition, and phase content remain unchanged. The superior catalytic activity of the MgCe-Al sample is attributed to the combination of weak basic sites and oxygen vacancies on the catalyst surface.

Multivariate analysis can be used to study industrial process data exhibiting collinearity between variables. Such data can often be collected into conceptually meaningful groups or blocks. While data blocks may appear intuitive (e.g., raw material properties vs. process parameters), such blocking is sometimes much more subjective. The novelty of this work lies in the investigation of the impact of data blocking on the subsequent analysis. To our knowledge, no such investigation can be found in the literature. To fill this gap, we analyze the impact of grouping data from 10 Canadian concrete plants in which multiple blocking alternatives are considered. The analysis is performed via principal component analysis (PCA) to reduce the dimensionality of the matrix and also via consensus principal component analysis (CPCA). The data grouping options are as follows: (1) all data combined into a single block, (2) grouped according to the factory, (3) grouped according to parameter type, and (4... [more]

Expansive soil swells with water and shrinks with water loss, causing serious safety problems for construction projects. This study emphasizes alkali-activated binder (NaOH excited fly ash) stabilized expansive soil. We found that swelling decreased with an increase in the amount of NaOH in alkali-activated binder. It was found that the alkali-activated binder stabilized expansive soils (AABS) had higher shear strength than untreated expansive soils (US), manifested by increased cohesion and friction angle. In AABS, the highest cohesion and the highest shear strength were found when the NaOH mass was 6% of the fly ash mass. The strength of AABS was similar to that of US without curing. AABS had higher strength than US after 7 and 14 days of curing. The unconfined compressive strength increased with extension of curing time. Combined with XRD and SEM analysis, it was shown that the mechanism of AABS was the formation of C−S−H and (C,N)−A−S−H and the change in the internal structure of e... [more]

Fabrication of self-reinforced polyethylene terephthalate (PET) has been achieved through the in situ generation of PET fibrils via a spun bond process. The reinforcement fibrils created from the PET with higher Tm are made from a unique in situ processing method. As a result, the fibrils are well dispersed and distributed in the lower Tm PET matrix. The high degree of molecular similarity affords perfect interfaces between the matrix and dispersed phase, leading to excellent stress transfer from the matrix to the dispersed fibrils. While the extremely large interfaces from the nanofibrillation process can maximize the advantage of the excellent molecular similarity of the self-reinforced polymeric composites, few studies have been conducted to research nanofibrillar self-reinforced polymeric composite systems. Hence, as a proof of concept, this work provides new insight into an approach for developing a self-reinforced polymeric system with a nanofibrillation process. This process inc... [more]

Soils contaminated by mining activities are a major environmental concern, and to avoid this type of environmental impact, carrying out high-cost processes is necessary. For this reason, a solution is proposed in this study in order to eliminate the soils contaminated by mining activities and, in turn, prevent the soil’s contaminating elements from causing harm. All this is achieved by using contaminated soils as raw materials for the production of ceramics for bricks. For this purpose, the materials were initially characterized physically and chemically, and different ceramic test pieces were manufactured with different percentages of clay and contaminated soil, subsequently determining the physical properties and the leaching of toxic elements. In this way, it was possible to evaluate, via innovative data mining and fuzzy logic techniques, the influence of the contaminated soil's contribution on the properties of ceramics. Based on this, it was possible to affirm that the contaminate... [more]

Due to growing concern over environmental impacts and the pressure to lower carbon footprints in the metals industry, hydrogen (H2) has gained attention as a promising alternative for the replacement of carbon as a reductant and fuel. This paper evaluates the potential use of hydrogen as an energy source and reducing agent during the processing of waste printed circuit boards (waste PCBs) from e-waste through black copper smelting. The effect of the use of carbon and hydrogen during the reduction−oxidation process was analysed and compared from the perspective of thermodynamics and heat balance. The thermodynamic analyses of waste-PCB processing were carried out using the FactSage thermochemical package for the smelting process at temperatures from 1473 K to 1673 K (1200−1400 °C). The results show that the CO2 emissions can be reduced by 73% when hydrogen is used as the reducing agent. A minimum of 10 wt% of waste PCBs in the feed material can be used to replace the necessary carbon to... [more]

Nanotechnology is an emerging multidisciplinary field that has the potential to offer solutions to pharmaceutical challenges starting from drug delivery to therapeutic applications. The plant-mediated method is eco-friendly and the most inexpensive of the various techniques used to synthesize nanoparticles (NPs). In this study, silver (Ag) NPs have been successfully synthesized using leaf extract of Catharanthus roseus and Ocimum tenuiflorum. X-ray diffraction revealed an average crystalline size of 19.96 and 21.42 nm for C. roseus and O. tenuiflorum-mediated Ag NPs, respectively. Further, shape, size, and elemental composition were analyzed using a scanning electron microscope, transmission electron microscope (TEM), and energy-dispersive X-ray spectral technique. TEM study revealed spherical/spheroidal-shaped Ag NPs were formed between 10−48 nm with C. roseus and 17−55 nm with O. tenuiflorum. Both synthesized Ag NPs inhibited Escherichia coli and Bacillus subtilis, where the effect w... [more]

The kinetics of amylose leaching in hot, excess water from native, oxidized-by-potassium permanganate and heat-treated potato starch at temperatures of 62−90 °C was investigated in isothermal conditions. For the first time, it was proposed to describe the kinetic data by the Kroger−Ziegler equation. It was found that for native starch in the range of 62−70 °C, the activation energy of the amylose leaching process is 192.3 kJ/mol, and at a temperature of 80−90 °C, it decreases to 22 kJ/mol. Similar patterns were established for modified starches. In the kinetic mode, the activation energy was 102.5 kJ/mol for oxidized starch and 44.7 and 82.5 kJ/mol for heat-treated starches at a temperature of 135 °C for 2.5 and 5 h. In the diffusion mode, it was: 18.7 kJ/mol for oxidized and 16.2 and 18.9 kJ/mol for heat-treated starches for 2.5 and 5 h, respectively. It is shown that the consideration of amylose leaching as a heterogeneous pseudochemical process makes it possible to explain the chang... [more]

To study the microscopic pore characteristics of marine−continental transitional shale, we studied the Daning−Jixian block of the Shanxi Formation using low-pressure CO2 adsorption (LP-CO2A) and low-temperature N2 adsorption (LT-N2A) methods in conjunction with field emission scanning electron microscopy (FE-SEM), geochemistry, and mineral composition analysis in order to obtain pore structure characteristic parameters. The fractal dimension of the pores was calculated using the Frankel−Halsey−Hill (FHH) model, and the study also discusses the factors that influence the pore structure. The study found that the marine−continental transitional phase shale of the Shanxi Formation has clay mineral contents ranging from 36.24% to 65.21%. The total organic carbon (TOC) contents range from 0.64% to 9.70%. Additionally, the organic matter maturity is high. The FE-SEM and gas adsorption experiments revealed that the transitional shale of the Shanxi Formation possesses a diverse range of pore ty... [more]

MXenes (Ti3C2Tx) have gotten a lot of interest since their discovery in 2011 because of their distinctive two-dimensional layered structure, high conductivity, and rich surface functional groups. According to the findings, MXenes (Ti3C2Tx) may block photogenerated electron-hole recombination in the photocatalytic system and offer many activation reaction sites, enhancing the photocatalytic performance and demonstrating tremendous promise in the field of photocatalysis. This review discusses current Ti3C2Tx-based photocatalyst preparation techniques, such as ultrasonic mixing, electrostatic self-assembly, hydrothermal preparation, and calcination techniques. We also summarised the advancements in photocatalytic CO2 reduction, photocatalytic nitrogen fixation, photocatalytic hydrogen evolution, and Ti3C2Tx-based photocatalysts in photocatalytic degradation of pollutants. Lastly, the challenges and prospects of Ti3C2Tx in photocatalysis are discussed based on the practical application of... [more]

The demand for ever-lighter structures raises the interest in bonding as a joining method, especially for materials that are difficult to join with traditional welding and bolting techniques. Structural adhesives, however, are susceptible to defects, but can be toughened in several ways: by changing their chemical composition or by adding fillers, even of nanometric size. Nanomaterials have a high surface area and limited structural defects, which can enhance the mechanical properties of adhesives depending on their nature, quantity, size, and interfacial adhesion. This work analyzes the Mode I fracture toughness of joints bonded with METLBOND® 1515-4M epoxy film and XantuLayr electrospun XD 10 polyamide nanofibers. Two joint configurations were studied, which differed according to the position of the nanomat within the adhesive layer: one had the nanofibers at the substrate/adhesive interfaces, and the other had the nanofibers in the center of the adhesive layer. Double cantilever bea... [more]

In the current investigation, elements extracted from Saccharum officinarum were identified as exporters of Fenton catalysts. Saccharum officinarum was soaked in an alkali prior to acidic treatment and then subjected to pyrolysis for elemental recovery. X-ray diffraction (XRD) and scanning electron microscopy (SEM) augmented with energy-dispersive X-ray spectroscopy (EDX) were used to identify the prepared catalyst. The material was combined with hydrogen peroxide, which led to Fenton’s reaction. Then, the modified Fenton system was applied to eliminate the textile dye, named Bismarck Brown Azo dye, contaminating the aqueous effluent. Response surface methodological model (RSM) analysis was used to identify the most effective operational parameters, and the model set the optimized values as 39 and 401 mg/L for Saccharum officinarum and H2O2 doses, respectively, at pH 2.9. The maximum Bismarck Brown Azo dye removal achieved was 85%. Increasing the temperature to 60 °C improved the dye o... [more]

Physical simulation is one of the effective methods to study mining problems, but the selection and proportion of simulation materials are greatly affected by the regional environment. This paper is based on a multilevel orthogonal design test scheme using sand, lime, and gypsum as the materials in the Shangwan coal mine in the Shendong coalfield, with the sand to cement ratio, paste to ash ratio, and maintenance days as variables. The effect of the polar difference method on the strength and density of gypsum was used as a reference for physical simulation in the Shendong coalfield. The sensitivity analysis of each factor was carried out by the polar difference method, and the influencing factors on density were, in descending order, sand to mortar ratio, mortar to ash ratio, and the number of maintenance days; the influencing factors on strength were, in descending order, mortar to ash ratio, maintenance days, and sand to mortar ratio. The sand cement ratio was negatively correlated... [more]

The microstructure mechanisms and mechanical properties of 0.23C-1.96Si-1.94Cr-1.93 Mn-0.35 Mo ultra-high strength steel treated by the deep cryogenic treatment at −196 °C were investigated after the steel was hot rolled at different temperatures. Experimental results show that austenitizing zone rolling with a large reduction in a single pass can comprehensively enhance the mechanical properties due to the high volume of retained austenite and refined lath martensite and bainite. The high strain gradient was suppressed, and tensile strength, yield strength, impact toughness, and total elongation were 2221 MPa, 2017 MPa, 65.5 J, and 16.9%, respectively. In addition, the austenitizing zone rolling can promote the formation of film retained austenite more than dual phase zone rolling, and retained austenite was decreased with an increase in rolling pass in a total rolling reduction of 75%. It is demonstrated that deep cryogenic treatment after austenite zone rolling with a large reductio... [more]

In this study, hydrothermal carbonization (HTC) at five temperatures (180, 200, 220, 240, and 260 °C) was applied to transform Paulownia leaves (PL) into a carbonaceous sorbent of Pb(II) from aqueous solutions. To enhance the adsorption efficiency of the obtained hydrochar (PH), subsequent alkali activation was performed using NaOH. Preliminary results of the Pb(II) adsorption (CPb = 200 mg/L) showed removal coefficients after 48 h of 73.44 mg/g, 82.37 mg/g, and 110.9 mg/g for PL, PH-220, and MPH-220, respectively. The selected hydrochar (PH-220) and modified hydrochar (MPH-220) were further investigated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The results revealed that alkali treatment changed the hydrochar structure and, thus, improved its adsorption performance. The kinetic parameters showed that the Pb(II) sorption onto MPH-220 followed a pseudo-second-order model, while the intra-particle diffusion went through two simultaneous stag... [more]

A novel UV-light-active MCC/S-VO2 photocatalyst was successfully synthesized by a simple and reliable hydrothermal route. XRD, FT-IR, Raman analysis, XPS, FE-SEM, EDX, TEM, DRS, and thermal analysis techniques were utilized for the characterization of the as-prepared photocatalysts. The photocatalytic activities of the V2O5, doped S-VO2, and MCC/S-VO2 nanostructures were investigated by monitoring the fading out of the methylene blue (MB) concentration under UV-light irradiation. The results revealed that the photocatalytic degradation of MB via MCC/S-VO2 was superior compared with that exhibited by pure V2O5 and doped S-VO2. It was found that 72.3% of MB (100 mL; 20 mg·L−1) was degraded after 6 h in contact with MCC/S-VO2. Interestingly, the photodegradation of MB dye was enhanced dramatically by adding H2O2, while 92.5% of MB was degraded within 55 min. The kinetic studies revealed that the MB degradation followed the pseudo-first-order model with a rate constant (kobs) of 3.9 × 10−2... [more]

Thermal runaway occasionally happens in batteries. A single battery, after thermal runaway, will release heat and transfer it to neighboring batteries, leading to thermal runaway of battery packs. Thus, it is necessary to explore the diffusion law of thermal runaway in battery modules. Heating is by far the most common way to trigger thermal runaway propagation of battery modules. In this paper, experiments and simulations were conducted to explore the influence of different heat insulation thicknesses on the thermal propagation of lithium iron phosphate batteries, and the result shows that the best thickness between adjacent batteries is 2 mm. For complex modules, the simulation analysis shows that when the spacing between adjacent modules in the battery pack was 10 mm and thermal runaway occurred on one side of the battery pack, it did not occur on the other side for a certain period of time. Therefore, the recommended spacing between modules in the battery pack is 10 mm. This lays a... [more]

With the increasing proportion of close-distance coal seam mining in China, the problem of strong mining pressure during the mining of close-distance coal seams is becoming more and more severe. This article focuses on the complex stress environment and severe mining pressure encountered in the mining of thick coal seams under the multi-coal-seam goaf of Zhunnan Coal Mine. By using research methods, such as similar material simulation, theoretical analysis, and numerical simulation, it studies in depth the instability characteristics of the overlying rock structure of the W1701 working face, the inducing factors and mechanisms of strong mining pressure during the mining process, and control measures. The results show that the roof structure of the W1701 working face can be divided into “high-level key layer (hard rock)−giant thick soft and weak rock group−low-level key layer (hard rock)”, and the law of mining pressure manifestation presents a small cycle formed by the instability of “... [more]