Abstract
A fault is a common geological structure encountered in underground coal mining. Interactions between the discontinuous structure of a fault and mining activities are the key factors in controlling the rock bursts induced by the fault. It is of great importance to study the rock burst mechanism of an extra-thick coal seam under the combined influence of reverse faults and coal mining for the prediction and prevention of rock burst. In this study, we establish a sliding dynamics model of rock mass in a fault zone and analyze the mechanical distribution of fault-induced rock bursts under the combined action of mining disturbances. Additionally, we utilize theoretical calculation and a 3D numerical simulation method to clarify the rockburst mechanism in an extra-thick coal seam controlled by a thrust fault under mining disturbance and a fault. The results showed that the distribution range of the shear stress increment in the fault footwall was larger than that in the hanging wall, revealing a skewed distribution. The fault dip angle and mining thickness exhibit significant influence on the structure around the fault. With increases in the dip angle of the fault and mining thickness, the maximum vertical stress and peak stress first increase and then decrease. A position 80 m away from the fault is the dividing line between the fault-non-affected area and the fault-affected area. The 13,200 working face of the Gengcun coal mine is used as a case study to study the influence of mining disturbances on microseismic events. The results of this study are in good agreement with the theoretical calculations and numerical simulation results.