Abstract
Blowout is one of the most serious safety threats in deepwater drilling. Considering the characteristics of gas invasion in complex formations, gas migration and distribution, and dynamic changes in temperature inside a wellbore, a deepwater well-closing pressure determination method considering thermal-fluid-solid coupling was proposed. The model was verified using actual data, and the average error in the increase in casing pressure during the closing process was found to be 5.42%. The shut-in pressure of oil and gas wells under a transient shut-in process was analyzed. The results showed that the fluid thermal expansion caused by temperature recovery had a significant impact on the change in wellhead backpressure after well closure. Furthermore, the time required for the wellbore pressure to recover to the formation pressure varies nonlinearly with factors such as geothermal gradients, pit gains, bottom-hole pressure, and gas production indices. A pressure calculation chart was developed for deepwater drilling. The shut-in time for deepwater drilling should not be less than 15 min, and in cases where the gas production index is small and the bottomhole pressure difference is large, the shut-in time should exceed 90 min. The results can provide theoretical guidance and technical support for well shut-in processes during deepwater drilling.