LAPSE:2018.0814
Thesis
LAPSE:2018.0814
Hydrodynamics in Recirculating Fluidized Bed Mimicking the Stripper Section of the Fluid Coker
October 30, 2018
The stripper section of a Fluid CokerTM consists of a system of baffles (sheds) that enhances the removal of interstitial and adsorbed hydrocarbon vapors from the fluidized coke-particles. Most of the hydrocarbon-vapors released below a stripper shed flow up to the stripper shed, where they may crack and form coke deposits that foul the shed. Extensive fouling changes the shapes of the sheds, makes them thicker and reduces the free-space between the adjacent sheds until downward solids flow is so impaired that the Coker has to be shut down. The Radioactive Particle Tracking (RPT) technique allows the determination of a radioactive tracer-particle location within a certain space inside a fluidized bed and has been the main tool used to study the motion of agglomerates and their interactions with internals. The research presents an innovative use of the RPT system, as a tool to measure the growth of internals fouling in time without the need of stopping the process. Moreover, the technique was able to characterize the type of interactions the agglomerate has with the sheds. In conjunction with a mathematical drying model, it was possible to predict the flow of organic vapors reaching each shed, thus estimating the risk of shed fouling, as well as the amount of liquid lost with the agglomerate as it leaves the stripper section. The investigation found that small agglomerates lose very quickly their liquid and therefore its ability to cause fouling. Moreover, experimental work showed that the solid recirculation rate is a very important parameter, e.g., decreasing it by half, quadruples the residence-time in all zones. The comparison of different types of sheds and configurations concluded that the Mesh-Shed type of internals performs the best. With regular sheds, the best configuration reduces the total open area by only 30%, instead of 50% as with the current sheds. A study of a ring-baffle that is inserted above the stripper section showed that its main advantage is that it increases the residence time of the agglomerates above the baffle, providing them with more time to dry. Adding flux-tubes to the baffle is detrimental to their performance.
Keywords
Agglomerates Drying Model, Baffles, Fluid Cokers, Fouling, Radioactive Particle Tracking, Recirculating Fluidized Beds, Sheds
Suggested Citation
Sanchez Careaga F. Hydrodynamics in Recirculating Fluidized Bed Mimicking the Stripper Section of the Fluid Coker. (2018). LAPSE:2018.0814
Author Affiliations
Sanchez Careaga F*: The University of Western Ontario [ORCID] [Google Scholar]
* Corresponding Author
[Login] to see author email addresses.
Year
2013
Publication Date
2013-12-22
Dissertation Institution
The University of Western Ontario
Version Comments
Original Submission
Record Map
Thesis

LAPSE:2018.0814
This Record
External Link

doi:10.1016/j.powtec.2017.10.061
Journal Paper
External Link

doi:10.1016/j.partic.2017.10.008
Journal Paper
External Link

doi:10.1016/j.apt.2018.04.011
Journal Paper
External Link

doi:10.1016/j.powtec.2015.01.034
Journal Paper
External Link

doi:10.1002/cjce.21740
Journal Paper
Download
Files
[Download 1v1.pdf] (38.9 MB)
Oct 30, 2018
Main Article
[Download 2v1.zip] (28.4 MB)
Oct 30, 2018
LabWindows CVI and Matlab Files
License
None Specified
 
Meta
Record Statistics
Record Views
1280
Version History
[v1] (Original Submission)
Oct 30, 2018
 
Verified by curator on
Oct 30, 2018
This Version Number
v1
Citations
Most Recent
This Version
URL Here
https://psecommunity.org/LAPSE:2018.0814
 
Original Submitter
Francisco
Links to Related Works